Skip to content

View asConnected

Plant

Line packs

One pack per equipment class: what a run is, which series and setpoints matter, the model, the limits and the words the UI uses.

Packs

Jacketed batch mixerOne batch, charge to dischargepack-batch-mixer Injection moulding cellOne shift run per toolpack-moulding

Words this pack sets

A run: Batch
Runs: Batches
Unit: batch
Outcome: Viscosity

Running settings on these lines

Hold temperature86 °C · band 80 to 90Trial

Hold time55 min · band 40 to 70Stay

Agitator speed150 rpm · band 130 to 170Stay

Jacketed batch mixer

Illustrative

Run definition: One batch, charge to discharge
Model: Line model A
Window template: Per grade, signed per quarter
Link threshold: 0.8 · lot links below it wait for a person

Series

4 read each run

Jacket temperatureAgitator speedTorqueBatch viscosity

Setpoints

3 Stamped may propose

hold-temphold-timeagitator

Constraints

Checked by the safety filter before any proposal

1Jacket temperature under 95 °C

2Hold time at least 40 min

Signed windows from this pack

Windows
Setting	Line	Window
Hold temperature	Line A	78 to 92 °C
Hold time	Line A	40 to 70 min
Agitator speed	Line A	120 to 180 rpm

Lines using it

Line A · Batch mixingGrade A-12Trial

Assets in those lines

Charge hopper1 tags Mixer M13 tags Jacket loop2 tags Hold tank H12 tags Discharge pump1 tags

Recent setpoint writes

Writes
Setting	Value	Source
agitator	150	prior
hold-time	55	prior
hold-temp	84	prior
agitator	150	prior
hold-time	55	prior
hold-temp	86	proposal

Packs side by side

Packs
Equipment class	Run	Series	Setpoints	Model	Windows	Link threshold	Lines
Jacketed batch mixer	One batch, charge to discharge	Jacket temperature, Agitator speed, Torque, Batch viscosity	hold-temp, hold-time, agitator	Line model A	Per grade, signed per quarter	0.8	Line A
Injection moulding cell	One shift run per tool	Melt temperature, Hold pressure, Cycle time, Part weight	melt-temp, hold-pressure, cycle-time	Line model B	Per tool, signed per quarter	0.8	Line B